NS010783
10 Bar Design Pressure
1220mm Diameter with 5000mm Shell
Built to LLOYDS CLASS 2/2 or 2/1 from P265GH or BS1501-151/161-430 A/B
-10°C to 50°C and 0.75mm Corrosion Allowance
inspection by Lloyds Register with to code
PED Category CAT 4 modules G
Group 2 Gases
3 X Inspection Opening(s)
400 x 300 McNeil Type Inspection Door
2 X Inlet(s)/Outlet(s)
150NB BS4504 or EN1092 PN16 Flanged
1 X Relief Valve
1 1/4″ BSPT 3000lb Screwed c/w m/f elbow
1 X Pressure Gauge
3/8″ BSPT 3000lb Screwed
2 X Drain Connection
1″ BSPT 3000lb Screwed
4 X Supports
150×75 Channel Support
1 X Vent
1/2″ BSPT 3000lb Screwed Plugged
Gritblasted to SA 2.5 followed by 2 coats of Tar epoxy prior to welding final end on.
Drawing Number (Orig)8308
Recent Comments