NS010775
44 Bar Design Pressure
610mm Diameter with 1500mm Shell
Built to PD5500 – 2012 – CAT 2 from P265GH or BS1501-151/161-430 A/B
-10°C to 50°C and 0mm Corrosion Allowance
inspection by Lloyds Register with 10% UT
PED Category CAT 4 modules G
Group 2 Gases
4 X Inspection Opening(s)
2″ BSPT 3000lb Screwed Plugged
1 X Air Inlet Connection(s)
1″ BSPT 3000lb Screwed
1 X Air Outlet Connection(s)
1″ BSPT 3000lb Screwed
1 X Relief Valve
1/2″ BSPT 3000lb Screwed
1 X Pressure Gauge
3/8″ BSPT 3000lb Screwed
1 X Drain Valve
1/2″ BSPT 3000lb Screwed
3 X Supports
Angle legs Support
Hot dip galvanized to EN1461 – due to the steel type used
galvanising may not be uniform in thickness & appearance
Drawing Number
Recent Comments