NS011061
9 Bar Design Pressure
610mm Diameter with 1500mm Shell
Built to ASME 8 – DIV 1 – NOT CODE STAMPED from P265GH or BS1501-151/161-430 A/B
5°C to 50°C and 1mm Corrosion Allowance
inspection by DNV with 100% UT & MPI
PED Category CAT 4 modules G
Group 2 Gases
3 X Support
MS Angle Legs
2 X Inspection Opening(s)
6″ ANSI B16.5 CL150 Flanged Branch With Cover
1 X Relief Valve
1/2″ ANSI B16.5 CL150 Flanged Branch
1 X Pressure Gauge
1/2″ ANSI B16.5 CL150 Flanged Branch
1 X Drain Valve
1/2″ ANSI B16.5 CL150 Flanged Branch
1 X water Inlet
1″ ANSI B16.5 CL150 Flanged Branch
1 X Air inlet
1/2″ ANSI B16.5 CL150 Flanged Branch
Hot dip galvanized to EN1461 – due to the steel type used
galvanising may not be uniform in thickness & appearance
Drawing Number (Orig)6471
Recent Comments