NS011613
16 Bar Design Pressure
1067mm Diameter with 600mm Shell
Built to PD5500 – 2012 – CAT 2 from P265GH or BS1501-151/161-430 A/B
0°C to 60°C and 1mm Corrosion Allowance
inspection by Lloyds Register with 10%UT
PED Category CAT 4 modules G
Group 2 Gases
1 X Inspection Opening(s)
24″ ANSI B16.5 CL300 Flanged Branch With Cover
4 X Supports
100x100x10mm Angle legs Support
1 X Inlet/Outlet Connection(s)
200NB BS4504 or EN1092 PN16 Flanged Branch
1 X Air Inlet Connection(s)
1″ BSPT 3000lb Screwed st/st. c/w 1/8″BSPT st/st red to 1/2″BSP
1 X Air Relief Connection(s)
1″ BSPT 3000lb Screwed st/st. c/w 1/2″BSPT st/st red to 1/2″BSP
1 X Drain Connection(s)
50NB BS4504 or EN1092 PN16 Flanged Branch
1 X Pressure Gauge Connection
1″ BSPT 3000lb Screwed st/st. c/w 1/2″BSPT st/st red to 1/2″BSP
2 X Level gauge
50NB BS4504 or EN1092 PN16 Flanged Branch (1 c/w drilled int plate)
1 X Top Lifter
No.2 Top lifter
1 X spare/level sensor connection
1″ BSPT 3000lb Screwed st/st c/w st/st plug.
Gritblasted to SA 2.5 followed by a DWI Reg 31 approved paint system suitable for potable water
Drawing Number (Orig)8971 rev 1
Recent Comments