Rednal Pneumatics ltd registered number 06933824 AKA Rednal Industries or just Rednals had administrators appointed on 27/2/14 This company produced compressed air receivers and Rednal separators with Rednal pneumatics nameplates. They designed and built small air...

These chilled water buffer vessels tanks increase the capacity of a chilled water system in for example the cooling system or air conditioning system in a large building This has the effect of stabilising the the return water temperature. As a result of this, the...

The photo below shows an abbott drinking water surge vessel for a UK water authority - for installation in a pumping station. The paint finish used is WRAS or DWI approved. A good range of coatings listed below can be used for this application. Water Regulations...

Links to random sites A3 Place .com <a href="http://www.a3place.com/">A3 Place .com</a>    

The picture below shows a dished / domed / torespherical pressure vessel head having a weld preparation machined on. The vertical borer at Abbotts can spin material up to 1300 mm diameter. The prep might also involve scarfing the thickness down in a shallow taper -...

See below recent work by our resident steel sculpture Duncan Thurlby - a very different approach from our own metal bashing methods ! Visit Duncan's website for a great gallery if his hard work individually made pieces of art- Duncan Thurlby sculptures

Visit from consultant Frank McGuire towards research and development of our pressure vessels and other services to meet requirements Of API American petroleum institute. Frank has 35 years experience in the worldwide oil and gas industry we hope soon to develop a...

The vessel below has been designed using the ASME pressure vessel design code to satisfy the requirements of the chapter 4 section 1 of ABS Rules. This vessel is built from carbon steel and incorporates a filter plate within. The vessel design calculations and drawing...

The photo below shows an abbott drinking water surge vessel for a UK water authority - for installation in a pumping station. The paint finish used is WRAS or DWI approved. A good range of coatings listed below can be used for this application. Water Regulations...

In the good old days We used weld procedures for welding carbon steel pressure vessels and air receivers to British standards BS 4871 and BS 4870 part one. These days a lot has changed and the process involves a number of stages. Nowadays we start with the welding...