NS011511
16.5 Bar Design Pressure
762mm Diameter with 2000mm Shell
Built to BS5169 – 1992 CL 2 – GR C from P265GH
-10°C to 50°C and 0.75mm Corrosion Allowance
inspection by Abbotts with None
PED Category CAT 4 modules B + D
Group 2 Gases
3 X Support
MS Angle Legs
3 X Inspection Opening(s)
100 x 80″ Oval Inspection Door
1 X Inlet
2″ BSPT 3000lb Screwed
1 X Outlet
2″ BSPT 3000lb Screwed
1 X Relief Valve
3/4″ BSPT 3000lb Screwed
1 X Pressure Gauge
3/8″ BSPT 3000lb Screwed
1 X Drain Valve
1/2″ BSPT 3000lb Screwed
Hot dip galvanized to EN1461 – due to the steel type used
galvanising may not be uniform in thickness & appearance
Drawing Number (Orig)7834
Recent Comments