NS010894
7.7 Bar Design Pressure
900mm Diameter with 1290mm Shell
Built to LLOYDS CLASS 3 from P265GH
0°C to 95°C and 0.75mm Corrosion Allowance
inspection by Lloyds Register with To Code
PED Category N/A modules N/A
Group 2 Gases
1 X Replaceable Rubber Bladder(s)
Suitable for cold potable water (50% acceptance level)
1 X Relief Valve
1/2″ BSPT 3000lb Modified Screwed end cap c/w mf elbow
1 X Pressure Gauge
1/2″ BSPT 3000lb Modified Screwed end cap c/w mf elbow
1 X Drain Connection
1/2″ BSPT 3000lb Modified Screwed end cap c/w plug
3 X Supports
80x80x10mm Angle legs Support c/w 6 thick backing plates
1 X Main inlet
St/st 1″ BSPT 3000lb Screwed
1 X Air Connection
1/8″ BSPT 3000lb Modified Screwed end cap
1 X Bottom connection
150NB BS4504 or EN1092 Flanged Pad c/w st/st blank assy
1 X Top Connection
90 O/Dia special pad
2 X Lifters
No.2 Lifters c/w 6 thick backing plates
Gritblasted SA 2.5 followed by one coat 2 pack epoxy primer
Drawing Number 8970 Rev 2
Recent Comments