NS011305
15 Bar Design Pressure
762mm Diameter with 2000mm Shell
Built to PD5500 – 2012 – CAT 2 from P265GH or BS1501-151/161-430 A/B
-10°C to 50°C and 1mm Corrosion Allowance
inspection by Lloyds Register with 10% UT
PED Category CAT 4 modules G
Group 1 Gases
1 X Inlet
50NB BS4504 or EN1092 PN16 Flanged Branch
1 X Outlet
50NB BS4504 or EN1092 PN16 Flanged Branch
1 X Relief Valve
3/4″ BSPT 3000lb Screwed Plugged
1 X Pressure Gauge
3/8″ BSPT 6000lb Screwed
1 X Drain Connection
3/4″ BSPT 3000lb Screwed
2 X Inspection Openings (s)
150NB BS4504 or EN1092 PN16 Flanged Branch With Cover
3 X Supports
60x60x8mm Angle legs Support
1 X Rear Inspection
150NB BS4504 or EN1092 PN16 Flanged Branch With Cover
1 X Transducer Point
3/8″ BSPT 6000lb Screwed
Gritblasted to SA 2.5 followed by 2 pack epoxy paint system
Drawing Number 9015 Rev 2
Recent Comments